Unitech MS837 User Manual Download

Page: 34 / 67

Trigger/Continuous Scan Modes

Note:

To program the scanner to operate in
Continuous Scan Mode, first scan the

Enable Automatic Scanning

bar

code, then scan the

Continuous

Automatic Scanning

bar code.

Enable Automatic Scanning

Continuous Automatic Scanning

–

The laser blinks continuously and
the IR is inactive.

Enable Manual Trigger (Default
scanning mode)

– The laser

activates when the CodeGate
button is pressed.

To restore the MS837 to its default
manual scanning mode, scan the

Enable Manual Trigger

bar code.

Beeper Options

Normal Tone

Optional Tone 1

Optional Tone 2

Optional Tone 3

Optional Tone 4

Optional Tone 5

Optional Tone 6

No Beep

Beep Once on Supplements

Beep Twice on Supplements

Enable Fast Beep

Disable Fast Beep

Enable Fun Tones

– scan this bar

code then
scan one of the Optional Tone bar
codes above.

Disable Fun Tones

Summary of Contents for MS837
































































Search results

Summary of Contents for MS837

Reviews:

Related manuals for MS837

Brands by name

Popular brands

Unitech MS837, User Manual

Search results

Summary of Contents for MS837

Reviews:

Related manuals for MS837

Brands by name

Popular brands