Unitech MS837 User Manual Download

Page: 25 / 67

Disable Code 128 ‘]C1’ Extended Code Format.

Enable Code 128 Group Separators

- A “GS” (1DH) character will be

transmitted with coupon Code 128 codes.

Disable Code 128 Group Separators

400 msec to Find Supplemental

- The scanner will allot 400

milliseconds to

find

an add on after a main UPC/EAN bar code has

been scanned.

200 msec to Find Supplemental

- The scanner will allot 200

milliseconds to

find

an add on after a main UPC/EAN bar code has

been scanned.

100 msec to Find Supplemental

- The scanner will allot 100

milliseconds to

find

an add on after a main UPC/EAN bar code has

been scanned.

Enable Code ID’s with Supplements

Disable Code ID’s with Supplements

Beep Once on Supplements

Beep Twice on Supplements

Enable ISBN Check Digit Transmission

- Not available with all

models.

Disable ISBN Check Digit Transmission

Enable Bookland to ISBN Conversion

- Not available with all models.

Disable Bookland to ISBN Conversion

Enable ISBN Re-Formatting

Disable ISBN Re-Formatting

Enable Bookland to ISBN 979 Conversion

Summary of Contents for MS837
































































Search results

Summary of Contents for MS837

Reviews:

Related manuals for MS837

Brands by name

Popular brands

Unitech MS837, User Manual

Search results

Summary of Contents for MS837

Reviews:

Related manuals for MS837

Brands by name

Popular brands