![background image](http://html1.mh-extra.com/html/unitec/mab-825/mab-825_operating-instructions-manual_3987016020.webp)
50
Preparations
MAB 825/845
ENGLISH
Using the drill chuck
Inserting the drill chuck
Push the drill chuck onto the tapered mandrel and push the
combination into the morse taper (3) of the machine. If nec-
essary, use an adapter sleeve.
Open the drill chuck and insert the tool into the drill chuck.
Close the drill chuck by hand and then tighten the drill chuck
with the chuck key.
Removing the drill chuck
Unlock the drill chuck with the chuck key and remove the
tool.
WARNING
Risk of injury!
Tighten the drill chuck only with the chuck key provided.
►
Always remove the chuck key from the drill chuck after tight-
►
ening or loosening.
Adapter for thread taps
Inserting the tool
Insert the thread tap into the adapter for thread taps (G).
Insert the appropriate adapter for thread taps (G) into the
KEYLESS quick-change drill chuck system (A).
Removing the tool
Open the quick-change drill chuck system (A) by pushing up
the sleeve and pull the adapter for thread taps (G) down out
of the chuck system.
Pull the thread tap down out of the adapter for thread
taps (G).
CS Unitec, Inc.
, 22 Harbor Ave., Norwalk, CT 06850 •
Toll-free:
800-700-5919 • Ph: 203-853-9522
Fax: 203-853-9921 •
Email:
Website:
www.csunitec.com