![background image](http://html1.mh-extra.com/html/unitec/mab-825/mab-825_operating-instructions-manual_3987016019.webp)
49
Preparations
MAB 825/845
ENGLISH
Weldon industrial arbor
Inserting the tool
Push the MK3 industrial arbor/Weldon 32 mm (G) into the
morse taper (3) of the machine.
Before inserting, clean the Weldon shank of the tool and the
tool mounting.
Loosen the two hex. socket head screws in the tool mounting
(G) using the Allen key (H) supplied.
Push the tool into the tool mounting (G).
NOTE
Insert the appropriate ejector pin (B,C,D) before inserting a
►
core drill.
Tighten the two hex. socket head screws in the tool mounting
(G) using the Allen key (H) supplied.
Removing the tool
Loosen the two hex. socket head screws in the tool mounting
(G) using the Allen key (H) supplied and pull the tool down-
wards out of the tool mounting.
KEYLESS quick-change drill chuck system
Inserting the tool
Push the KEYLESS quick-change drill chuck system (A) into
the morse taper (3) of the machine.
Connect the lubricant line.
Open the quick-change drill chuck system (A) by pushing up
the sleeve and insert the tool into the chuck.
NOTE
Insert the appropriate ejector pin before inserting the core
►
drill.
Check by briefly turning the tool whether the collet is en
-
►
gaged.
Removing the tool
Open the quick-change drill chuck system (A) by pushing up
the sleeve and pull the tool down out of the chuck.