![background image](http://html1.mh-extra.com/html/unitec/mab-825/mab-825_operating-instructions-manual_3987016008.webp)
38
Safety
MAB 825/845
ENGLISH
Do not leave the machine unsupervised during operation.
■
Store the machine in a dry, temperate location out of the reach
■
of children.
Do not leave the machine standing outdoors and do not ex-
■
pose it to moisture.
Make sure that your work area is sufficiently lit (>300 Lux).
■
Do not use low power machines for heavy working.
■
Make sure that your workplace is clean.
■
Keep the machine clean, dry and free of oil and grease.
■
Follow the instructions on lubricating and cooling the tool.
■
Electric shock hazard
DANGER
Danger to life by electric shock!
Contact with live wires or components could lead to seri
-
ous injury or even death!
Observe the following safety precautions to avoid electric
shocks:
Do not open the housing of the machine. Risk of electric
►
shock if live terminals are touched.
Never immerse the machine or the plug into water or other
►
liquids.
Use only extension leads or cable drums with a cable cross-
►
section of 1.5 mm².
Only use extension leads that are approved for the place of
►
work.
Check the condition of the extension lead regularly and
►
replace if damaged.
Avoid direct body contact with grounded parts (e.g., tubes,
►
radiators, steel girders) to reduce the risk of electric shock in
the event of a defect.
CS Unitec, Inc.
, 22 Harbor Ave., Norwalk, CT 06850 •
Toll-free:
800-700-5919 • Ph: 203-853-9522
Fax: 203-853-9921 •
Email:
Website:
www.csunitec.com