Unit UST-020, User Manual

Page: 7 / 12

User manual | Руководство пользователя |
Toaster | Тостер | UST-020
7
Reheat
If necessary, you can reheat cooled toast.
1. Place toast into the device.
2. Lower the lever and press the button «Reheat». Lights up indicator light « Reheat «
3. At the end of the cycle, the toaster will switch off automatically.
Note. In this mode you can warm up toasts without additional Browning. If you heat it up in the toaster the bread with
raisins or seeds, remove them from the surface of the toast before preparation, because, once inside the toaster,
they can result in damage to the toaster or down to fire.
Cleaning
1. Before cleaning unplug the toaster from the power outlet and allow it to cool.
2. To clean the appliance don’t use abrasive substances.
3. Never immerse the toaster in water. Watch carefully not to get water inside the device.
4. Wipe the surface of the device with a slightly damp cloth, then wipe it dry.
5. Slide out tray for collecting crumbs, remove crumbs, set the pan in place.
Attention! Immediately after the end of the cooking process, the tray will be hot.
To avoid damage of the instrument never place foreign objects in compartments for toasts.
Model: UST-020
Power supply: 220-240 V ~ 50 Hz
Power: 900 W
The head office of the manufacturer :
«UNIT Handelsgesellschaft G.m.b.H.»
131, Gersthofer Str., A-1180, Vienna, Austria
Exported by: «UNIT Electronics (H. K.) Limited»
3905 Two Exchange Square, 8 Connaught Place,
Central, Hong Kong
Made in People’s Republic of China (P.R.C.)
This appliance is to be stored and used under the following conditions:
temperature – not less than +5°C; relative humidity - not higher than 80%;
aggressive impurities in the air: not allowable.
As the Manufacturer is constantly working on the improvement of its
products, the design and technical specifications are subject to change
without prior notice.