Digital Video Network Surveillance System
Unisight Digital Technologies, Inc.
16
Turn on the power switch in the rear panel.
When DVR is started,
[
POWER
]
lamp is in green. On the monitor or VGA display,
DSP and HDD initialization process will be shown.
The first line represents DSP initialization. If the DSP icon is “×”, it means that
the DSP is initialized error, please contact administrator at once.
The second line represents HDD initialization. If the HDD icon is “×”, it means
the corresponding HDD is not installed or not detected. If HDD is not detected, please
contact administrator.
Note: If HDD is not installed or not detected, DVR will beep for alarm. You can
disable the buzzing in “alarm” menu ->”Exceptions” option.
4.2
Preview
DVR will enter into preview mode after it is started.
On preview screen, you can see date, time, camera name and camera status icon.
Set system date and time in “Camera”
→
“Date OSD” menu, please refer to 5.5;
Change camera name in “Camera” menu, please refer to 5.5
In the screen, it will display record and alarm status of each camera. Shown as
fig 4.1, These two kinds of status will switch over automatically.
Press
[
A
]
key to display or hide the camera status bar.
