13
INSTALLING THE DISHWASHER Cont'd
Direct wiring
1
Remove the junction box cover from the power supply junction box on the wall.
2
Locate the three dishwasher wires, (white, black, and green) with stripped ends, then insert
the dishwasher wires through the small hole in the junction box.
3
Secure the house wiring to the bottom of the junction box with a strain relief fitting.
4
Use wire nuts to connect incoming ground to green, white to white, and black to black.
5
Replace the junction box cover. Make sure that no wires are pinched under the cover.
Ground to green
White to white
Black to black
Insert wires through strain relief fitting and tighten
Junction Box
Phillips screwdriver
You'll need:
Strain relief (for
electrical connections)
Three wire nuts
(UL listed)
Summary of Contents for CLASSIC RETRO UGP-24CR DW T
Page 27: ......
