18
INSTALLING THE DISHWASHER Cont'd
1
Position the dishwasher in front of the opening, then slide the dishwasher into the opening a
few inches at a time.
2
Push the dishwasher into the cabinet. The front corners of the dishwasher door should be
flush with the cabinet doors. Be careful not to dent the front panel with your knees or damage
the countertop or cabinets with dishwasher parts.
1
Open the door, then place a level on the
door and on the rack track inside the tub
to make sure that the dishwasher is level.
2
Level the dishwasher by adjusting the
four leveling legs individually.
Step 10: Position the dishwasher under the countertop
Step 11: Level the dishwasher
Tip:
Check tub insulation blanket, if equipped. It should be positioned so it is not bunched up or interfering
with door springs. Check by opening and closing the door.
IMPORTANT:
The dishwasher must be level for proper dish rack operation and wash performance.
Note:
You may need to pull your dishwasher out of the cabinet if major adjustments to the four leveling legs
are required.
Note:
You will not have access to the back leveling legs once the dishwasher is put in place.
TIp:
Pull the lower rack out about halfway. Make sure that the rack does not roll forward or back into the
dishwasher. If the rack rolls in either direction, you must level the dishwasher again.
Do not push against the
front door panel with your
knees. You will damage
the front panel.
Reposition the dishwasher
by grasping both sides
with your hands.
Check front-to-back level
Check side to side level
Summary of Contents for CLASSIC RETRO UGP-24CR DW T
Page 27: ......
