UniPOS FS4000, Instruction Manual

Page: 9 / 34

UniPOS Fire Control Panel FS4000
Instruction manual Page 9
Revision 11/01.17 of 34
Table 2
Means of control
Condition of the fire
control panel
Access
level
Operation
Button Reset
Fire condition Level 2 Exit of Fire condition
Button Outputs
Fire condition Level 2
- if outputs for fire condition are activated
–
to suppress the outputs;
- if outputs for fire condition are not activated
– to force activation
Button Buzzer
Fire condition and
Fault condition All
Levels
To suppress / activate the local buzzer
Button Test
Indication
Duty mode
All
Levels LED indication and Testing of the sound
signal
Remote Input
“RST” for remote reset fire operation. On short-circuit activation on the input then
the zones in fire will be reset and the panel exit from fire.
6.3. Configuration modes of lines, outputs and operation of the interface RS485
– General
description
Fig. 1
In the Fire Control Panel through DIP-switches there are options for:
- defining operation mode of the lines (pos.4, fig.1);
- defining time delay (pos.3, fig. 1);
- disabling monitored outputs (pos.3, fig. 1);