background image

 3

OFF

INDICATOR INSTRUCTION

Four led indicate the level of charge (S.o.C.)

Allarm led

Level of charge

Led ON
Led OFF
Flashing led

Battery ON

Battery on discharge

(example: 75% remaining capacity) 

Battery on charge  

(last led level of charge flashing)

BMS block the battery

(alarm state)

Red led 

 + 1green flashing led 

CAUSE OF THE ALLARM STATE

Over discharge

Current pulses beyond the allowed limits

Short circuit

Battery temperature too high

Battery temperature too low

from 100% to 76%

from 75% to 51%

from 50% to 26%

from 25% to 11%

from 10% to 0%

Summary of Contents for ZLI012051

Page 1: ... and please safely deal with the disuse battery Don t charge the battery in environments where the temperature is over 50 C or lower than 5 Don t reverse the two electrodes when use the battery Don t penetrate the battery with sharp things Do not disassemble the battery Battery has usage cycle life if its using time is quite little than usual please change your battery Don t weld the battery direc...

Page 2: ...mperatura di scarica consigliata Recommendeddischargetemperature 10 C 45 C Temperaturadicaricamassima Maximumchargetemperature 0 C 60 C Temperatura di carica consigliata Recommendedchargetemperature 5 C 40 C INSTALLATION USE The battery has two cables one red positive and a black one negative with which it will be possible to load and unload it also The battery is supplied without connector availa...

Page 3: ...mple 75 remaining capacity Battery on charge last led level of charge flashing BMS block the battery alarm state Red led 1green flashing led CAUSE OF THE ALLARM STATE Over discharge Current pulses beyond the allowed limits Short circuit Battery temperature too high Battery temperature too low from 100 to 76 from 75 to 51 from 50 to 26 from 25 to 11 from 10 to 0 ...

Page 4: ... it Even if the discharge is not allowd disconnect the battery form the load and wait for the temperature rising When the red alarm LED go off check the state of charge of the battery and if not completely discharged reconnect it to the load STAND BY DISPLAY If the battery remains on without being used it will go into stand by mode after 5 hours To exit stand by mode press the ON OFF button or pre...

Reviews: