4
Safety & Precautions
Before unpacking, installing and operating the
iColor Coater
, please make sure you read and follow
these safety instructions.
The
iColor coater
can be installed by the customer after reading and following the detailed
directions provided in this manual.
CAUTION:
The operator of the
iColor coater
must take extreme caution during the running of
the machine to prevent the possibility of a Fire!
When feeding stock you must make sure it is exiting the
machine
, i.e. not getting jammed in
the delivery area or it will catch on Fire!
CAUTION:
A
Class A,B,C
fire extinguisher and a metal garbage can with a metal lid should be
located in close proximity to the
iColor coater
system in case a coated sheet gets caught
under
the lamp and catches fire.
Class A
extinguishers are for ordinary combustible materials such as paper, wood,
cardboard and most plastics.
Class B
fires involve flammable or combustible liquids such as gasoline, kerosene,
grease and oil.
Class C
fires involve electrical equipment, such as appliances, wiring, circuit breakers
and outlets. Never use water to extinguish class C fires - the risk of electrical shock is
far too great!
CAUTION:
Those coatings cannot be used which build an explosive atmosphere when being
heated up under the UV Dryer.
CAUTION:
A licensed / certified electrician MUST connect
iColor coater
to the plant pow
-er.
CAUTION:
Do not connect or disconnect any power cables or perform any maintenance to
the
iColor coater
while the system is powered on.
WARNING:
Some of the components (i.e. UV lamp housing, bulb and duct) of the
iColor
coater
system may become hot during normal operation. Use care when handling or touching
these components.
