manualshive.com logo in svg

Uninet IColor 650, User Manual

Share
Download
Uninet IColor 650 User Manual Download Page 72

 

72 

 

Printing Tips 

 

When transferring images with halftones, it’s possible that some of the adhesive from your 2 step paper will not transfer 
over to the toner during the first step. If you see this happen with your image, just reprint the image with a white overprint 
using the ProRIP to thicken up the density and give the adhesive something to stick to. Halftone colors use much less 
toner. Printing the white over the image will fill in the halftones of color, with density below 70%. Using white overprint is 
necessary, even when transferring to white colored textiles. 

 

There are many variables that could produce different results. Specific steps may need to be altered based on: 

•

 

Type and brand of Heat Press: The temperature and duration varies slightly based on the heat press being used. 
All instructions are based on using a Hotronix Fusion press. Clam shell and other types of swing away presses 
may also yield different results. 

•

 

Type of image: Photos or full color graphics may require a longer press time than vector images or text. 

•

 

Type of garment or substrate: Cotton, Polyester, and Spandex material all respond differently to heat, as do hard 
surfaces like acrylic or wood. All textile instructions are based on cotton garments. 

•

 

Toner Coverage: Halftones in image may cause undesired results. Toner coverage should not be less than 70%, 
otherwise there will be issues with transferring the adhesive to the transfer sheet. Halftones can be corrected by 
printing white on top of color using the IColor ProRIP Software to apply a white layer in one pass. This will help 
with toner coverage and proper adherence to the garment. 

 
To find the serial number of your unit, there are 3 ways: 

1)

 

Printed on the outside of the box the printer shipped in. 

2)

 

Through the control pad on the printer: Menu / Configuration / System / Serial number. 

3)

 

Print a system configuration page: Menu / Print Information / Configuration. 

 
Consult the IColor knowledge base for specific instructions on a variety of transfer paper offered at: 

http://www.icolorprint.com/support 

(Or scan this QR Code) 

 

 
 

Technical Support Email: Log a ticket at 

https://www.icolorprint.com/get-support 

 

Technical Support Phone: 631-590-1040, Option 2 

 

SAVE THE BOX AND PACKAGING! Needed if the machine needs to be sent back for service.  

 

 

 

 

 

 

 

 

Summary of Contents for IColor 650











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands