21
Loading Media
1)
Uninet suggests using the MP Tray when printing transfers.
2)
If using tray 1, pull out the paper cassette (1) and set the paper size dial (2) to match the loading paper size.
•
For example, set the dial to [A4] when loading A4 size paper with a landscape configuration.
•
If the size of paper cannot be found in items of the dial, set "Other".
•
If you draw the cassette with the printer power on, the paper size, paper type, and paper thickness of the tray are
sometimes displayed on the panel.
•
If you change paper, change the settings
to the appropriate values. You can change the setting to hide the screen.
To hide the tray paper size message, select [Admin Setup] > [Panel Setup] > [Paper setup when paper exchange]
and set it to [Off].
•
Make sure to match the size of paper and that on the paper size dial. Otherwise, paper size error occurs and a
‘stop’ or jam may occur.
•
For size of paper which can be loaded either horizontal or vertical such as A4, please be careful of the direction.
3)
Slide the paper guide (3) and paper stopper (4) to the size of paper to be loaded.
•
Ensure the paper stack does not exceed the upper limit mark inside the paper tray (5).
•
Be sure to load more than a few sheets in this tray, or multiple sheet feeding may occur.
