69
Printing with Fluorescent Colors
Instantly transform your IColor printer into a fluorescent printer where the printed images produced will glow
brightly under UV light. The upgrade kit consists of 3 toner and 3 drum cartridges (CMY) and is shipped in 6
separate boxes. Simply remove and store the standard CMY toner/drum cartridges and swap with the fluorescent
kit to instantly print with UV sensitive toner while using the standard black cartridge in place. The white cartridge
that shipped with your IColor 650 printer can also be used if a white overprint is required.
Operating on the same application principles as standard toner that ships with your printer, you can print and/or
press onto virtually any surface using the appropriate transfer paper – or print directly onto paper, transparencies
and label stock regardless of which printer is being used. Be sure to design your graphics with bright colors – avoid
dark or black colors (unless specifically wanted), as those will not fluoresce well and may not look good as a final
product. Most fluorescent images will be placed on a black or dark colored garment, so black would not be
suggested in these cases anyway.
Specific installation instructions can be found at www.icolorprint.com/support
Printing with Dye Sublimation Toner
Instantly transform your IColor printer into a sublimation printer. The upgrade kit consists of 4 toner and 4 drum
cartridges (CMYK) and is shipped in 8 separate boxes. Simply remove and store the standard cartridges and swap
with the sublimation kit to instantly print and sublimate on coated materials.
Operating on the same application principles as standard ink sublimation systems, you must press onto white 100%
polyester or sublimation coated materials for best results. 50/50 cotton poly blends may also be used for a lighter,
vintage look. There is no white overprint option with sublimation, only CMYK prints are possible.
The IColor Dye Sublimation Upgrade Kit has several unique advantages suited for a production environment:
•
Vastly faster print speeds: 35 pages per
minute vs 34 pages per hour for ink (photo mode).
•
No clogged heads resulting from non-use. Toner based systems do not have this maintenance issue.
•
Longer expiration period.
•
Much higher page yield: 5,000 pages standard toner vs 350 pages for starter ink.
•
Use of regular copy paper instead of special dye sublimation paper.
Specific installation instructions can be found at www.icolorprint.com/support
Ask your dealer about upgrading to security and clear toner options as well!
