Unigas K590X, Manual Of Installation - Use - Maintenance

Page: 12 / 120

PART I: SPECIFICATIONS
12
To get the input in kcal/h, multiply value in kW by 860.
Data are referred to standard conditions: atmospheric pressure at 1013mbar, ambient temperature at 15° C
NOTE: The performance curve is a diagram that represents the burner performance in the type approval phase or in the laboratory tests, but does not
represent the regulation range of the machine. On this diagram the maximum output point is usually reached by adjsuting the combustion head to its
“MAX” position (see paragraph “Adjusting the combustion head”); the minimum output point is reached setting the combustion head to its “MIN” position.
During the first ignition, the combustion head is set in order to find a compromise between the burner output and the generator specifications, that is why
the minimum output may be different from the Performance curve minimum
Pressure in the Network / gas flow rate curves(natural gas)
PRESSURE IN
COMBUSTION
CHAMBER
(mb
ar)
K590X L-
kW
K750X L-
kW
GAS P
R
ES
SURE
mbar
K590X M-
Stm
3
/h
K750X M-
Stm
3
/h
GA
S PRESSURE m
b
ar
K660X M-
Stm
3
/h
GAS PRES
SURE
mbar
K590X L-
Stm
3
/h
K750X L-
Stm
3
/h