Unify OpenStage M3 EX Operating Instructions Manual Download

Page: 68 / 130

Group functions

You belong to multiple groups

Leaving and re-joining individual groups

Press and hold the Talk key or press and hold the Speakerphone key.

Open the system menu.

Either:

[

Select the menu item and confirm.

Or:

> <

[

Select the menu item and confirm.

then:

Select the required group and call the additional menu.

Either:

> <

[

Select the menu item and confirm. You have now left the selected group.

Or:

> <

[

Select the menu item and confirm. You have now joined the selected group.

then:

Press the On-hook key to end the operation.

Leaving and re-joining all groups

Press and hold the Talk key or press and hold the Speakerphone key.

Open the system menu.

Either:

> <

[

Select the menu item and confirm.

Or:

> <

[

Select the menu item and confirm.

then:

The list of groups is displayed.



Press the hash key. You have now left all groups.

Or:

Press the star key. You have now joined all groups.

then:

Press the On-hook key to end the operation.

Menu

Leave hunt group?

Join hunt group?

Group 1



Group 2

Mnu

Leave hunt group?

Join hunt group?

Menu

Leave hunt group?

Join hunt group?

Group 1



Group 2

Summary of Contents for OpenStage M3 EX



































































































































Search results

Summary of Contents for OpenStage M3 EX

Reviews:

Related manuals for OpenStage M3 EX

Brands by name

Popular brands

Unify OpenStage M3 EX, Operating Instructions Manual

Search results

Summary of Contents for OpenStage M3 EX

Reviews:

Related manuals for OpenStage M3 EX

Brands by name

Popular brands