36
Web Interface
Preparatory Steps
Opening the Web Interface
To evoke the interface, open a web browser and enter the following URL:
https://[IP of the telephone]
Where [IP of the telephone] stands for the IP address of the OpenStage 5 SIP that you want to
map.
A host name has been assigned to your telephone; you can evoke the web interface using this
host name in the browser. Please check the name with your service personnel. You can then ac-
cess the web interface for your telephone e.g. in the following format:
https://hostname.domainname
If applicable, confirm an advisory message of the browser with "Yes":
The homepage appears:
Call up the user interface
User
Click here to access the user area.
Enter the user ID for the OpenStage 5 SIP telephone (maximum length: 24) and click "Login". If a
user ID has not been specified, enter the default value "000000".
The administrator can set a minimum length (between 6 and 24 characters) for the user
password. If the minimum length was changed in the meantime so that your password is too
short now, you are asked to change your password (
Page 37). Only after you have
changed your password you can log on to the user interface.
