Multiline
33
Direct Station Select key Status Indication
Multiline Calls
While you are on a call, an incoming call is signaled by the LED on another line
key.
Press the blinking line key. The first line switches to manual hold mode and you
are connected with the caller on another line, e.g.
Line 2
.
Once the call has been concluded and the second line connection cleared down,
you can return to the first call by pressing the line key, e.g.
Line 1
.
or
Press the line key with the lit LED to put the current call on manual hold, e.g.
Line 1
.
Once the call has been concluded and the line connection, e.g. for
Line 2
, has
been cleared down, you can return to the first call by pressing the corresponding
line key, e.g.
Line 1
.
Using the Direct Station Select key
Using a set up
Direct Station Select
key (DSS)
you can call the target tele-
phone directly or pick up a call for the target telephone.
Direct Station Select – Call other party
Press the
Direct Station Select
key
to call the other party. The other party's
telephone rings.
Pick up a call for a Direct Station Select User
Press the blinking
Direct Station Select key
. The call is forwarded to the main
line of your telephone. You are connected to the caller.
LED
Line status
Description
OFF
Idle
The line assigned is not used.
ON
Busy
The main line of the target telephone is busy.
BLINKING
Incoming call
An incoming call is waiting on the main line of the target tele-
phone.
Line 2
Line 1
DSS
DSS
