Unify OpenStage 40 User Manual Download

Page: 50 / 124

Enhanced phone functions

The result is displayed

If only one name is found, it is displayed.

Confirm.

If several names are found (max. 50), the first name is displayed.

Press,

select and confirm the option shown,

select and confirm the option shown.



Select and confirm the option shown.

If no name is found

If your search does not yield any name corresponding to your query, you can ex-
tend the range of the search, e.g. by deleting characters.

Select and confirm the option shown.



For further procedure, see above.

If too many names are found

If more than the maximum of 50 names are found corresponding to your query,
only an incomplete list of results can be displayed.

You can view these results, select any of the names, or change the search string
(e.g. narrow the search by entering more characters).

Confirm, to view the incomplete list.



For further procedure, see above.

Narrow the search down.

Select and confirm, in order to change the search string.



For further procedure, see above.

Call

Scroll Next

Scroll Previous

Call

Modify search

In this case it is advisable to narrow down the search so that all corre-
sponding names can be displayed.

Show matches

Modify search

Summary of Contents for OpenStage 40





























































































































Search results

Summary of Contents for OpenStage 40

Reviews:

Related manuals for OpenStage 40

Brands by name

Popular brands

Unify OpenStage 40, User Manual

Search results

Summary of Contents for OpenStage 40

Reviews:

Related manuals for OpenStage 40

Brands by name

Popular brands