Unify OpenStage 40 User Manual Download

Page: 18 / 124

Getting to know your OpenStage phone

5-way navigator

With this control, you can manage most of your phone’s functions, as well as its displays.

Remove the protective film from the ring around the 5-way navigator before using the phone.

Operation

Functions when key is pressed

Press

In idle mode:
• Open the idle menu



Page 22

In lists and menus:
• Go to next level

You can now access a context menu:
• Open the context menu

Press

In lists and menus:
• go back one level or go back to the telephony interface by press-

ing several times

During en-bloc dialing:
• Delete character to the left of the cursor

Press

In idle mode:
• Open the idle menu



Page 22

In lists and menus:
• Scroll down
• Long press (key held down): jump to the end of the list/menu

Press

In idle mode:
• Open the idle menu



Page 22

In lists and menus:
• Scroll up
• Long press (key held down): jump to the start of the list/menu

Press

In idle mode:
• Open the idle menu



Page 22

Entry selected:
• Perform action

Summary of Contents for OpenStage 40





























































































































Search results

Summary of Contents for OpenStage 40

Reviews:

Related manuals for OpenStage 40

Brands by name

Popular brands

Unify OpenStage 40, User Manual

Search results

Summary of Contents for OpenStage 40

Reviews:

Related manuals for OpenStage 40

Brands by name

Popular brands