manualshive.com logo in svg

Unify OpenStage 40, User Manual, Page: 89 / 124

Share
Download
Unify OpenStage 40 User Manual Download Page 89

More functions/services

89

Communicating with PC applications over a 
CSTA interface

If configured (contact your service personnel), you can use your phone to com-
municate with PC applications (CSTA = 

C

omputer 

S

upported 

T

elecommunications 

A

pplications). You send information to the application and 

receive information from the application, for example, via your phone display.

S

Press the "Data I/O" key.

(Key programming 

 Page 64)

j

Enter the three-digit ID for the application you wish to control.

+-0

 ... 

9e

Use the relevant keys to communicate with the application.

Temporarily interrupting communication with the application

^

The phone is ringing. You answer the call.

T

The "Data I/O" key flashes: Communication to the application is automatically in-
terrupted.

Resuming communication with the application

T

Press the flashing "Data I/O" key. The LED lights up.

Ending communication with the application

Select and confirm the relevant CSTA message.

or

^

 

\

Lift the handset and replace it again.

Summary of Contents for OpenStage 40





























































































































Reviews:

No comments