Unify OpenStage 40 User Manual Download

Page: 31 / 124

Basic functions

Answering a call via the loudspeaker
(speakerphone mode)

Suggestions for using speakerphone mode

• Tell the other party that you are using speakerphone mode.
• The speakerphone works bests at a low receiving volume.
• The ideal distance between the user and the telephone set in speakerphone

mode is about 50 cm (approx. 20 inches).

The phone is ringing. The caller appears on the screen.

Press the key shown. The LED lights up.

Confirm.



The speakerphone function is activated.

if nec.

Set the call volume. Keep pressing the key until the desired volume is set.

Ending a call

Press the key shown. The LED goes out.

Press the key shown.

Accepting a call via the headset

Prerequisite:

A headset is connected.

The phone rings. The

key flashes.

Press the key shown.

if nec.

Set the call volume.

Answer

Make sure your headset port is set up properly



Page 29.

Summary of Contents for OpenStage 40





























































































































Search results

Summary of Contents for OpenStage 40

Reviews:

Related manuals for OpenStage 40

Brands by name

Popular brands

Unify OpenStage 40, User Manual

Search results

Summary of Contents for OpenStage 40

Reviews:

Related manuals for OpenStage 40

Brands by name

Popular brands