Unify OpenStage 20 T User Manual Download

Page: 26 / 67

Basic functions

Displays

In idle mode (



Page 13), the following signals remind you that call forwarding

is activated:

Fixed/variable call forwarding

The key LED lights up.

Phone number of the forwarding destination

Call forwarding for internal/external

The key LED lights up.

Using callback

Storing a callback

Prerequisite:

The internal station called is busy or nobody answers.

Confirm the option shown.

Accepting a callback

Prerequisite:

The internal station called was busy. You have saved a callback

request.

Your telephone rings.

Lift the handset. You hear a ring tone.

Press the key shown. You hear a ring tone.

Forwarding to
220870 PETER

Call forwarding is on

There is no display message for the call forwarding types "Busy", "No an-
swer" and "Busy/no answer". The LED key does not light up.

If your belongs to an ONS group (parallel call



Page 62), please note the

following:

Callback on busy is only signaled on the busy phone, not in the whole ONS
group.



Callback on no reply is entered in the mailbox (



Page 14) on all internal

system phones in an ONS group.

Callback?

If the called party was busy, the callback is automatic.

If the called party did not answer, a message is left in the called party’s
mailbox.

If the party has activated call forwarding (



Page 22), you will receive the

callback from the call forwarding destination.

Summary of Contents for OpenStage 20 T




































































Search results

Summary of Contents for OpenStage 20 T

Reviews:

Related manuals for OpenStage 20 T

Brands by name

Popular brands

Unify OpenStage 20 T, User Manual

Search results

Summary of Contents for OpenStage 20 T

Reviews:

Related manuals for OpenStage 20 T

Brands by name

Popular brands