Unify OpenStage 20 T User Manual Download Page 14

Page: 14 / 67

Getting to know your OpenStage phone

Mailbox

Depending on your communication platform and its configuration (contact your administrator), you
can use the mailbox key to access messages from services such as HiPath Xpressions.



The following messages are saved:
• Callback requests
• Voicemail

Messages (callback requests)

New messages, or messages that have not yet been processed are signaled as follows:
•

The key LED lights up.

• When the handset is lifted and the speaker key pressed, you hear an acoustic announcement

(announcement text).

Accessing the menu: Press the mailbox key

. The newest entry is displayed.

Example:

Voicemail

Press the mailbox key

If your system is appropriately configured, you can call the voice mailbox directly and immediately
play back the stored messages.

These announcements remain active until all messages have been viewed or deleted.

For a description of how to edit the entries



Page 27.

New voicemails that have not been played back fully cannot be deleted. To mark a message
as "played back", jump with

to the end of the message.

WE . . :

16:25

10168 PETER

Call N

Date

Time

Caller ID

Function menu

Type of message

05.08

Summary of Contents for OpenStage 20 T




































































Search results

Summary of Contents for OpenStage 20 T

Reviews:

Related manuals for OpenStage 20 T

Brands by name

Popular brands

Unify OpenStage 20 T, User Manual

Search results

Summary of Contents for OpenStage 20 T

Reviews:

Related manuals for OpenStage 20 T

Brands by name

Popular brands