Unify Gigaset S400 professional, User Manual

Page: 109 / 142

37
ECO DECT
Deutsch
English
ECO DECT
You are helping to protect the environ-
ment with your Gigaset S400 professional.
Reducing energy consumption
By using a power-saving adapter plug,
your telephone consumes less power.
Reducing radiation
The radiation from your telephone is
reduced automatically :
u
The handset's transmission power is
reduced depending on the distance to
the base.
u The transmission power on the base is
reduced to virtually zero when only one
handset is registered and the handset is
placed in the base.
You can reduce the radiation from the
handset and base even more by using Eco
Mode or Eco Mode+ .
u
Eco Mode
reduces the base's transmission power
by 80% in standby and talk mode.
u
Eco Mode+
reduces the base and handset's trans-
mission power by 100% when the
phone is not being used to make or
receive a call.
Eco Mode / Eco Mode+ can be activated/
deactivated independently of one another
and can also be used with multiple hand-
sets. The handset must not be placed in
the base.
Activate/deactivate Eco Mode /Eco Mode+:
v
¢
Ï
¢
Eco Mode
¢
Eco Mode / Eco Mode+
§Change§
Press the display key
(
³
= on).
Status displays
Display icon
Ð i Ñ Ò
|
(flashes)
Signal strength:
– good to poor
– no signal
Ð
white Eco Mode deactivated
Ð green Eco Mode activated
¼
white Eco Mode+ activated
(displayed instead of the
reception strength icon
when in idle status)
¼ green Eco Mode and Eco
Mode+ activated
Please note
u
With Eco Mode+ activated, press
and hold the talk key
c
to check
that the base can be reached. You
will hear the dialling tone if the base
can be reached.
u
When Eco Mode+ is activated:
– Call setup is delayed by approx.
two seconds.
– Handset standby time is reduced
by approx. 50%.
u Registering handsets that do not
support Eco Mode+ will cause the
mode to be deactivated on the base
and all other handsets.
u
Activating Eco Mode reduces the
range of the base.
u
Eco Mode / Eco Mode+ and
repeater support (
¢
page 51) can-
cel each other out, i.e., if you use a
repeater, you cannot use Eco Mode
or Eco Mode+ .