Making calls – the basic functions
33
Activating/deactivating the handset
a
Press the on-hook key until the activation or deactivation is confirmed by a sig-
nal.
PIN
If the default PIN has not been changed (0000), the handset is ready for opera-
tion as soon as it is switched on. If a PIN was set, it must be entered before the
handset can be operated.
o
Enter the PIN
[
Confirm your entry. The handset is ready to use.
Displaying the connection quality
The strength of the incoming signal is displayed by the "receive field strength"
icon in on or message status:
The radio range is different indoors and outdoors
your system administrator in the event of range problems.
Charging batteries
You may only use the charging shell provided for the handset.
The handset charges when sitting in the charging shell, even when deactivated.
If the handset is active, the charging status display flashes on the display.
If the handset deactivates because the batteries are flat, it automatically reacti-
vates and is ready for operation as soon as you place it in the charging shell.
The charging operation starts. If a PIN was set, it must be entered first to allow
charging to start.
Language
If your preferred language for the display texts is not set, you can set this your-
self
Please enter
PIN:
|
flashing, no reception
Ò
Low receive field strength
Ñ
50% receive field strength
i
75% receive field strength
Ð
100% receive field strength
