15
Putting the Handset into Operation
Putting the Handset into Operation
Removing the protective cover
Inserting the batteries
The handset is supplied with the approved batteries. The batteries are not charged. They are
charged in the handset.
1. If attached: remove the attachment clip
Insert a screwdriver between the attachment clip and the battery cover (1) and force the attach-
ment clip outward (2) until it dislodges.
Also dislodge and remove the clip on the opposite side.
Remove the protective cover from the display before putting the handset
into service.
Note:
• Please observe the safety notes
• Only use approved batteries
• Always replace both batteries at the same time and only use two batteries of the same
type/ from the same manufacturer!
• Open the battery compartment in a dust-free environment only.
• Your telephone directory entries and all settings remain stored even if you remove the bat-
teries. The date and time settings will be reset.
• Only remove the batteries if they are defective. The battery’s life diminishes each time it
is removed.
2
1
