Unify Gigaset M2, User Manual

Page: 74 / 101

Additional functions
74
PC interface (V24, USB)
You can use the PC interface (via a Slim Lumberg cable) to read and modify
phonebook entries, pictures and sounds.
Configuring the PC interface
To configure the PC interface, you must:
1. deactivate the Bluetooth interface on the handset (

Page 77).
2. use a data cable (  Page 86) to connect the headset/PC interface jack
on the handset to the computer.
3. install the MPM application.
For more information, consult your system administrator.
Data transfer mode
Certain functions necessitate the transfer of large volumes of data be-
tween the handset and the computer. When these functions are selected,
the handset switches to data transfer mode and "Data Transfer" appears on
the display. In this mode, no inputs are possible via the keyboard and calls
are ignored.
The handset is switched to data transfer mode by:
• activating read/write access to the phonebook
• loading screensavers
• loading melodies
Note:
If the PC interface does not work, first deactivate the Bluetooth in-
terface (  Page 77), then switch the handset off and back on.
Note:
The handset automatically switches to idle if a fault occurs in the
course of transferring data.