background image

Safety notes

9

Compliance to german BGR 139 (Personal alarm 
functionality)

(for Gigaset M2 

plus 

professional and Gigaset M2 Ex professional only)

Notes:

• For BGR-compliant operation as a personal alarm signal device 

with a voice communication capability (PNG-S), the handset 

must operate in conjunction with a PNEZ (emergency call cen-

tre). Handset operation without PNEZ is not BGR-compliant.

• The alarm signal function cannot be deactivated by the user. De-

activation is only possible via a PNEZ control call.

• For compliance with BGR 139, the handset may only be config-

ured by specially qualified technicians. The PNG configuration 

menu should be PIN-protected to prevent unauthorised config-

uration changes. The PIN should be kept secret.

Attention:

• The pre-alarm volume starts low and gradually rises until it be-

comes very loud. Users should be aware of this.

• The battery pack must always be sufficiently charged for the an-

ticipated length of operation. The battery pack’s charging capac-

ity diminishes over its life. It should therefore be replaced by 

specially qualified technicians when capacity levels become in-

sufficient (discharging speeds up over time). If necessary, con-

sult your safety officer.

Summary of Contents for Gigaset M2






































































































Reviews: