Unify Gigaset M2 User Manual Download Page 24

Page: 24 / 101

Putting the handset into service

Inserting/replacing the memory card and the

battery pack

The handset comes with an approved battery pack and memory card.

Battery pack

The battery pack is not charged. It is first charged in the handset.

The Ex battery pack features special electronics. Gigaset M2 Ex profes-

sional detects whether an Ex battery pack or a normal battery pack is in-

serted. The handset will not switch on if a normal battery pack is inserted.

Memory card

The memory card is located under the battery pack. Phonebook and calen-

dar functions cannot be performed without the memory card.

The memory card contains the following data:

• Phonebook entries/redial list

• Calendar entries/appointments

You can transfer your memory card to a new Gigaset M2 handset if your

original handset is defective. This ensures you do not lose your data.

Notes:

• Note: Please observe the safety notes.

• Ageing can diminish the battery pack capacity making it insuffi-

cient for the anticipated length of operation (discharging

speeds up over time). The battery pack must be replaced by

specially qualified technicians if this happens.

• Only use the approved battery pack (



Page 28).

• Open the battery compartment outside the Ex zone and in a

dust-free environment only.

• Your telephone directory entries and all settings remain stored

even if you remove the battery pack. The date and time settings

will be reset.

Summary of Contents for Gigaset M2






































































































Search results

Summary of Contents for Gigaset M2

Reviews:

Related manuals for Gigaset M2

Brands by name

Popular brands

Unify Gigaset M2, User Manual

Search results

Summary of Contents for Gigaset M2

Reviews:

Related manuals for Gigaset M2

Brands by name

Popular brands