manualshive.com logo in svg

Unify BSIP2, Service Documentation

Unify BSIP2 offers comprehensive service documentation in the form of user manuals for free download. Find all the information you need to operate and maintain your product efficiently. Access these essential manuals from manualshive.com and empower yourself with knowledge to maximize the benefits of your Unify BSIP2.

Share
Download
background image

A31003-C1020-S100-03-7620, 12/2017
OpenScape Cordless IP V2, Service Documentation

3

Contents

Contents

1 Introduction and Important Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6

1.1 Safety Information and Warnings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6
1.2 Correct Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8
1.3 Proper disposal and recycling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9
1.4 Standards and Guidelines on Installation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  10

1.4.1 Labeling  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  10

1.5 Data Protection and Data Security. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11
1.6 Documentation Feedback  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12

2 Overview  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  13

2.1 Introduction  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  15

2.1.1 DECT IP Base Station (BSIP2). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  15
2.1.2 DECT Manager & Integrator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  15

2.1.2.1 Communication Interfaces. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  20

2.2 System Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  22

2.2.1 Small deployment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  23
2.2.2 Medium deployment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  24

2.3 DECT IP Base Station Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  25

2.3.1 Outdoor Case   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  26
2.3.2 Powering the DECT IP Base Stations  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  27

2.4 Network Requirement  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  28
2.5 Software License Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  29

3 Planning a OpenScape Cordless IP System  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  32

3.1 Planning According to Call Traffic Load. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  32
3.2 General  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  34
3.3 Propagation Conditions for Radio Traffic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  35

3.3.1 In the Open with Visibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  36
3.3.2 Industrial Sites  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  36
3.3.3 Indoor Areas in Buildings in Brick and Light Construction Materials  . . . . . . . . . . . . . . . . . . . . . . . . . .  37
3.3.4 Indoor Areas in Reinforced Concrete Buildings with Diverse Interior Layout . . . . . . . . . . . . . . . . . . . .  38

3.4 Determining the Installation Site  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  40

3.4.1 Indoors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  40

3.4.1.1 In Buildings of Brick or Light Construction Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  .   40
3.4.1.2 In Steel/Concrete Buildings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  42
3.4.1.3 Factory Halls and Open-Plan Offices  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  46

3.4.2 Outdoors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  46

3.5 Installing Base Stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  50

3.5.1 Ethernet Connection Cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  50
3.5.2 Where Not To Install DECT IP base stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  51
3.5.3 Where Should DECT IP base stations be installed?  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  .   52
3.5.4 Indoors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  53

3.5.4.1 Wall Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  53
3.5.4.2 Ethernet Socket Allocation in the DECT IP Base Station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  54

3.5.5 Tools/Aids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  55
3.5.6 Outdoors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  55

3.5.6.1 Preparatory Tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  56
3.5.6.2 Pole Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  57

Summary of Contents for BSIP2



































































































Reviews:

No comments

Related manuals for BSIP2

Vega ATEX Safety Instructions preview
ATEX
Brand: Vega Pages: 68
Valor 1100IN Danger A Barrier Designed To Reduce The Risk Of Burns From The Hot Viewing Glass Is Provided With Th preview
1100IN
Brand: Valor Pages: 72
Wavetronix smartsensor advance Installation & Quick Start Manual preview
smartsensor advance
Brand: Wavetronix Pages: 2
X-lite CLEO Installation Instructions preview
CLEO
Brand: X-lite Pages: 5
MAD AMPX FOC ESC 60A Manual preview
AMPX FOC ESC 60A
Brand: MAD Pages: 2
MAD AMPX ESC 40A HV Manual preview
AMPX ESC 40A HV
Brand: MAD Pages: 2
NeuLog NUL-232 Manual preview
NUL-232
Brand: NeuLog Pages: 4
Produal KRM-X-1 User Manual preview
KRM-X-1
Brand: Produal Pages: 9
Calix M5T 187A Assembly Instructions preview
M5T 187A
Brand: Calix Pages: 5
Mobeye WaterGuard CM2300 Portal User Manual preview
WaterGuard CM2300
Brand: Mobeye Pages: 32
PROAIM MC-RONS Assembly Manual preview
MC-RONS
Brand: PROAIM Pages: 3
UBEXi iDIG User Manual preview
iDIG
Brand: UBEXi Pages: 16
iDataLink maestro Pr 2 Install Manual preview
maestro Pr 2
Brand: iDataLink Pages: 99
Metra Electronics 70-5511 Installation Instructions preview
70-5511
Brand: Metra Electronics Pages: 2
DEFA WarmUp 411702 Fitting Instructions Manual preview
WarmUp 411702
Brand: DEFA Pages: 9
rough country Slim Line LED Light Grille Kit Manual preview
Slim Line LED Light Grille Kit
Brand: rough country Pages: 8
Nauticam NA-GH5 Instruction Manual preview
NA-GH5
Brand: Nauticam Pages: 33
Camtree Hunt X5 Follow Focus Setup And Operation Manual preview
X5 Follow Focus
Brand: Camtree Hunt Pages: 4

Brands by name

Popular brands

Load more brands