Unified Brands Randell DPM Series Operator'S Manual Download Page 4

4          

800-621-8560

 

 

Warranty Policies 

 

 Randell  believes  strongly  in  the  products  it  builds  and  backs them  with  the  best 
warranty in the industry.  Standard with every unit comes the peace of mind that 
this  unit  has  been  thoroughly  engineered,  properly  tested  and  manufactured  to 
excruciating tolerances, by a manufacturer with over 30 years of industry presence.  
On  top  of  that  front  end  commitment,  Randell  has  a  dedicated  staff  of  certified 
technicians  that  monitor  our  own  technical  service  hotline  at  1-800-621-8560  to 
assist you with any questions or concerns that may arise after delivery of your new 
Randell equipment. 
 
PARTS WARRANTY 
1. One year parts replacement of any and all parts that are found defective in 
material  or  workmanship.    Randell  warrants  all  component  parts  of 
manufactured new equipment to be free of defects in material or workmanship, 
and  that  the  equipment  meets  or  exceeds  reasonable  industry  standards  of 
performance  for  a  period  of  one  year  from  the  date  of  shipment  from  any 
Randell factory, assembly plant or warehouse facility. 
 
NOTE:   warranties  are effective  from  date  of shipment, with  a thirty  day 
window  to  allow  for  shipment,  installation  and  set-up.    In  the  event 
equipment  was  shipped  to  a  site  other  than  the  final  installation  site, 
Randell will warranty for a period of three months following installation, 
with proof of starting date, up to a maximum of fifteen months from the 
date of purchase. 
 
2.  Free  ground  freight  of  customer  specified  location  for  all  in  warranty  parts 
within  continental  U.S.    Component  part  warranty  does  not  cover  glass 
breakage  or  gasket  replacement.    Randell  covers  all  shipping  cost  related  to 
component part warranty sent at regular ground rates (UPS, USPS).  Freight 
or postage incurred for any express or specialty methods of shipping are 
the responsibility of the customer.
 
 
LABOR COVERAGE 
In  the  unlikely  event  a  Randell  manufactured  unit  fails  due  to  defects  in 
materials  or  workmanship  within  the  first  ninety  days,  Randell  agrees  to  pay 
the contracted labor rate performed by an Authorized Service Agent (ASA). 
Any warranty work performed by a non-ASA will not be honored by Randell. A 
complete listing of current ASAs can be found on the Randell page of our web 
site : 

www.unifiedbrands.net

. Warranties  are  effective  from  date  of  shipment, 

with a thirty day  window to allow for shipment, installation and setup.  Where 
equipment is shipped to any site other than final installation, Randell will honor 
the labor warranty for a period of ninety days following installation with proof of 
starting date, up to a maximum of six months from date of purchase.    
 

Summary of Contents for Randell DPM Series



























Reviews: