170720 Rev. B
Page 2
1.3
Attach each shelf (Item 2) to the stand with eight 2” hex-head screws (Item 4), inserting
the screws through the legs. Install a washer (Item 5) under the head of the screw and under
the dome nut (Item 6) holding the screw, as shown below. Square up and tighten the stand
before installing the steamer(s).
Item No
Part No
Description
Qty
1
170719
Leg, Intek Steamer Stand
4
2
170718
Shelf, Intek Steamer Stand
2
3
142684
End Plug, 1-1/2” Square Tube
4
4
156055
Screw, Hex Head, ¼-20 x 2”
16
5
005472
Washer, Plain, ¼”
32
6 090567
Nut,
Dome,
¼-20
16
7
129788
Plug, Hole, 9/32”
48
8 042505
Foot
Insert,
Bullet
4
1.4
Install the four plastic end caps (Item 3) in the top of the stand legs (Item 1) as shown.
Install the four bullet foot inserts (Item 8) in the bottom of the legs as shown. The plugs and feet
install with a gentle tap from a mallet.
1.5
Use the 48 hole plugs ((Item 7) to close off any unused mounting holes in the steamer
stand legs, as shown.
