170720 Rev. B
Page 3
1.6
If the stand is to have casters or flanged feet, they are supplied in separate kits. See the
instructions provided and install the casters or flanged feet in place of the bullet feet.
2.0 Steamer
Installation
2.1
Prepare the Intek steamer by loosening and removing the four short legs and the four
screws on the base. Refer to the diagram below. Set the legs aside as they will be replaced
with machine screws included in the stand kit.
Item No
Part No
Description
Qty
7
129788
Plug, Hole, 9/32”
48
9
005449
Screw, Hex Head, 3/8-16 5/8”
8
10 005830
Washer,
3/8”
8
Hex screws (4)
that are removed
Legs (4) that are
removed
