19
8. Input for external BGM
For Für die Einspeisung einer externen Hintergrundmusik stehen Ihnen die folgenden Quellen zur Verfügung:
Input
Connector
Input Sensitivity/-
Impedance
XLR, balanced (29)
500mV/10KOhms
Cinch (RCA), unbalanced (28)
200mV/10KOhm
Cinch (RCA), unbalanced (28)
200mV/10KOhm
Selection of the requested input is done with the key AUX SELECT (7) on the front panel.
9. Using the Prioriority Input TEL. EMER
The TEL.EMER input (45, 46) is Vox controlled and has the highest priority.
Low level input
(46)
At the ter / - / GND a balanced low level signal
can be fed in.
The input sensitivity is 100mV at 600 Ohms, the muting
theshold of the VOX circuit is 20 mV.
High level input
(45)
At the terminals 0V/100V a balanced high level signal
can be fed in.
The muting threshold of the VOX circuit is 20 mV.
If an audio signal with appropriate level is detected by the VOX circuit it will be reproduced with the highest priority
The volume of this paging signal can be adjusted with the ‘TEL.Level’ volume control.
Simultaneous operation of the high level and the low level input is not possible!
