15
2. Rear View
16
19
20
21
22
23
24
25
26
28
27
29
30
31
32
33
34
35
36
37
38
39
40
41
45
46
58
48
49
50
51
56
57
52
53
54
55
15
17
18
42
43
44
To UCX 8012
Designed in Germany
Ser.No_____________
UCA 8240
Mixer Amplifier
Max.output power
360W
Rated output power
240W
115/230V ~,50/60Hz
RoHs
15 Power switch
16 Power selector
17 Socket for power cord
18 Power fuse
19 Earth connector
20 24V DC connector
21 Direct Output connector
22 Connector for remote power
23 Dip switch to select operation mode
24 Dip switch to activate pilot tone detection.
25 Dip switch to select prority modes
26 Dip switch to select chime
27 Chime level control
28 AUX 2 and AUX 3 Cinch Audio input
29 AUX 1 / XLR Audio input
30 Slide switch to select input sensitivity and
phantom power for MIC 6 / Line 2
31 Audio input MIC 6 / Line 2
32 Slide switch to select input sensitivity and
phantom power for MIC 5 / Line 1
33 Audio input MIC 5 / Line 1
34 MIC 4 input
35 Dip switch to activate phantom power for MIC 4
and MIC 3
36 MIC 3 input
37 MIC 2 input
38 Dip switch to activate phantom power for MIC 1
and MIC 2
39 Dip switch to activate the RJ45 (41) input for
microphone UPM 8001
40 MIC 1 input
41 RJ45 connector for one all call mic UPM8001
42 Level control for MOH output (44, 43)
43 Output for connecting a monitor speaker
44 Output to connect an external monitor amplifier
45 Priority input for high level signal (100V)
46 Priority input for low level signal
48 Connector for UPM 8006 desk top mic
49 Connector for wall panel UWC 8006
50 Balanced output for external power amp
51 Audio output for a recording device
52 Audio input of the internal power amp section
53 Audio output of the internal pre amp section
54 Control for level reduction of AUX inputs (28) in
case of priority mode
55 Connector for zone extension unit UCX 8012
56 Input for 100V signal of an external power amp
57 100V zone outputs
58 Antenna connectors for internal music source
module
