Uniden XDECT 8155 Series, Owner'S Manual

Page: 28 / 68

28
Changing the Volume
Staying in the Range
If... Then...
the handset and base are
connected and no signal from
the base
the handset sounds an error tone and
Out of Range or Unavailable at this
time displays.
the handset is in Talk mode and
moves out of range
the outside line is put on Hold for 30
seconds and then dropped. The LCD
alternately displays Out of Range and
Check Base Power
.
the handset and base are in
standby mode and the handset
does not get a signal from the
base
the LCD alternately displays Out of
Range
and
Check Base Power
.
audio deteriorates the handset sounds an error tone. The
LCD alternately displays End of Range
and Move toward base .
you are trying to go off-hook call data displays and then an error
tone sounds. The LCD alternately
displays Unavailable at this time .
you are trying to go on-hook END displays.
Your system will alert you when you are out of range (or about to go out of
range).
To change the... When... Press...
earpiece volume for
each handset
you are listening to that
earpiece or speaker
(playing messages,
etc.)
UP
to increase the
volume.
DOWN
to decrease it.
speaker volume
ringer volume (If you
turn the ringer all
the way down, that
particular ringer turns
off.)
The phone is in
standby.