manualshive.com logo in svg

Uniden XDECT 8155 Series, Owner'S Manual

Share
Download
Uniden XDECT 8155 Series Owner'S Manual Download Page 64

8

CAUTION!

 Risk of explosion if battery is replaced by an incorrect type! 

Dispose of used batteries according to the instructions. Do not open or 

mutilate the battery. Disconnect the battery before shipping this product.

Rechargeable Nickel-Metal-Hydride Battery Warning

• 

This equipment contains a rechargeable Nickel-Metal-Hydride  

(Ni-MH) battery.

• 

Do not short-circuit the battery.

• 

The rechargeable batery contained in this equipment may explode if 

disposed in a fire.

• 

Do not charge the battery used in this equipment in any charger 

other than the one designed to charge this battery as specified in the 

owner’s manual. Using another charger may damage the battery or 

cause it to explode.

Rechargeable batteries must be recycled or disposed of properly. Uniden 

works to reduce lead content in PVC coated cords in our products & 

accessories.

Summary of Contents for XDECT 8155 Series





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands