Uniden UIP312 User Manual Download

Page: 36 / 72

2. Dialing (Using Function key)

Including the

SHIFT

key, there are 8 Function keys.

To access Function keys F1 through F7, press the desired key without
pressing the

SHIFT

key.

SHIFT

/ F14

/ F13

/ F12

/ F11

/ F10

/ F9

/ F8

Note:

The name information of the pressed Speed dial key is displayed for about 2

seconds. If no name, its number is displayed instead.

To access Function keys F8 through F14, first press the

SHIFT

key and

then press the desired key. When the shift key is pressed, the LED light on
the shift key will be turned on.

SHIFT

F7 /

F14

F6 /

F13

F5 /

F12

F4 /

F11

F3 /

F10

F2 /

F1/

Note:

The plastic cover of the speed dial label can be removed by inserting the tip of a

pen or pencil into each of the holes at either end of the label and lifting up.

Page 32

Summary of Contents for UIP312









































































Search results

Summary of Contents for UIP312

Reviews:

Related manuals for UIP312

Brands by name

Popular brands

Uniden UIP312, User Manual

Search results

Summary of Contents for UIP312

Reviews:

Related manuals for UIP312

Brands by name

Popular brands