49
To access this option and to enable/disable DHCP:
1. If already in Network Configuration menu, use the
▲
or
▼
keys to
access DHCP option.
2. Press
Select
.
3. Use the
▲
or
▼
keys to select enable/disable, and then press
Select
.
If “Enable” is selected, the message “Press Select to Restart” is displayed.
Press
Select
, to restart the telephone. The LCD shows “Initializing...\” and then
“Searching DHCP Server...”.
• If “Disable” is selected, the message “Press Select to Restart” is displayed.
Press
Select
to restart the telephone. The LCD shows “ “Initializing...\” is
displayed. The display returns to the date and time.
• If you do not want to restart the telephone, press
Cancel/Del
(to return to the
previous menu) or
Menu
to exit programming and return the telephone to
standby mode. If
Line 1
,
Line 2
,
Speaker/Handset
, or if the handset is picked
up, the telephone goes off-hook and the restart is cancelled.
• When telephone restart is cancelled, the new network settings are not accepted
until the telephone is restarted.
Terminal IP Address
This option is used to read or change the current terminal IP address value,
if the DHCP assignment has been disabled. If DHCP is enabled, an IP
address is assigned by the DHCP server when the telephone reinitializes.
Press Select to Restart
Network Config:
IP Address
2/6
DHCP
Disable
1/2
DHCP
Enable
2/2
Summary of Contents for UIP300
Page 1: ...UIP300 H 323 IP Phone Guide Administrator...
Page 78: ...76 Memo...
Page 79: ...77 Memo...