61
To change the password:
1. Enter the old password in the
Current User Password
field.
2. Enter the new password in the
New User Password
field.
Administrator Configuration
This menu allows Administrative users to review and modify the network
and/or the protocol configuration.
The password consists of 6 ~10 digits. If the password entry is not valid, an error
message is displayed. To correct the password, click “Back to User Password
Change” and reenter the passwords.
If the user password change is successful, the user will be prompted to log in
again using the new password.
3. Confirm the new password in the
Confirm New Password
field.
The new settings are stored in the flash memory of UIP300 and the page
is refreshed with the updated settings. If
Refresh
is clicked before
Submit
, the values posted in the page are reset.
Figure 4-12 Web Login Screen
1. Start the web browser from a PC that is connected to the same IP
network as UIP300.
2. Check the IP address on the telephone and enter that IP address in the
web browser: http://169.254.1.10
3. When the Enter Network Password screen appears, enter the
User Name
and
Password
. Click
OK.
• At default the User Name is
admin
.
• The password is 6 ~ 10 digits. At default, the Password is
654321
.
Summary of Contents for UIP300
Page 1: ...UIP300 H 323 IP Phone Guide Administrator...
Page 78: ...76 Memo...
Page 79: ...77 Memo...
