Uniden UBCD996T, Owner'S Manual

Page: 96 / 148

96
In addition to this scan you can search any of the preprogrammed service or custom
search ranges.
While scanning, press . Rotate the until you reach the desired
service or custom search range. Press to unlock it. You can also assign a
System Quick Key to the search to make it easy to quickly enable/disable the search
range for search and scan. The Search with Scan Hold time determines how long
the scanner stays on a search before moving on. The default is 2 seconds. See
Page 95 to change the Search with Scan settings.
You can change the way service search works for each service. There are also two
methods to reach the point of editing.
Select a service range:
+
Press to .
At this point you can edit each of the settings that comprise each custom search
range.
The following show you how to set the various option settings associated with a
Service. For each, your starting operation is
Select a service range:
to select a value from , , , , , and .
Scroll Control
[L/O]
[MENU]
[SCAN/SEARCH]
Editing a Service Search
Method One
Method Two
g Q g
Q g
Q
g
Q g
g Q g
Q g
Q
Q g
Search for ...
Edit Service
Quick Search? Yes=”E” / No=”.”
[.No] then Edit Service
[MENU] Search for ...
Edit Service
1 sec 2 sec 3 sec 4 sec 5 sec Off
Air, CB Radio, UHF CB Radio, Racing, TV Broadcast, FM
Broadcast, Police, Marine, Railroad
g
Set Delay Time