Uniden UBCD996T, Owner'S Manual

Page: 50 / 148

50
If you enter a frequency then press , the scanner stores it in the
group in a system called . These groups are created if
they do not exist. Then, the scanner prompts you to save other channel settings.
If you enter a talk group ID then press , the scanner stores it into a channel
group named in the current system. If the talk group ID’s format is
not the type used by the current system, the scanner displays an error message and
does not save the talk group ID.
If you pressed in Step 3, the scanner prompts you to select the system and the
group where you want to store the frequency or talk group ID.
The scanner will warn you if you try to store two channels in the same system
that have the same frequency or Talk Group ID or if you try to store two systems with
the same name.
To get a visual indication of the activity on trunking systems, press
to hold on any channel. Then tap the and then
press The scanner replaces the third line on the display with trunking activity
indicators. When the scanner is monitoring on EDACS or Motorola system, the
activity indicators will show which system frequencies have activity.
for Motorola systems you must program all system frequencies (control and
voice frequencies) for this feature to work.
[E ]
[E ]
[.No]
Note:
[HOLD/RESUME] Scroll Control
[.No]
Note:
YES
YES
Qck Save
Grp Qck Save Cnv Sys
Qck Save Grp
Trunking Activity Indicators