Uniden UBCD996T, Owner'S Manual

Page: 14 / 148

Memory Backup
Temporary Lockout
Startup Configuration
Single-Handed Function Control Operation
Record Out Jack
Display and Keypad Backlight
Vehicle Power Connection (Orange Wire)
Trunk Tracker IV™ Operation
Multi-Site Trunking
Control Channel Only Scanning
Adaptive Digital Threshold
Location Based Scanning
GPS Non-Radio Based Features
GPS Display Mode
— If power is lost or disconnected, the scanner retains the
frequencies you programmed in its memory.
— Makes it easy to temporarily lock out a system, channel, or
frequency. The lockout is cleared when you turn power off, then back on so you
don’t have to remember to unlock the channels later.
— Lets you easily manage multiple configurations for your
scanner.
— You can tap the Function/Scroll
Control to enable the Function mode. It reverts to normal mode in about 3 seconds
from your last press if no other action occurs.
— Using the appropriate cable and audio recording device with
signal control, you can record live audio of designated channels.
— Makes the display and keypad easy to see in
dim light using two color options and six light levels plus off.
— Lets you connect to your vehicle’s
dimmer circuit to also dim the scanner’s display with the vehicle’s dimmer control.
— Follows unencrypted conversations on analog
Motorola, Motorola Astro 25 (APCO 25), EDACS, EDACS SCAT, and LTR trunked
radio systems, including systems in VHF, UHF, 700 MHz, 800 MHz, and 900 MHz
bands. The scanner can scan both conventional and trunked systems at the same
time.
— Lets you share system channels across multiple sites to
more efficiently use the scanner’s memory and more easily select sites to monitor.
— If the scanner is set to scan a Motorola
system, you can set it so it scans using only control channel data. You do not have
to program voice channel frequencies into memory in this mode as long as all
possible control channels are programmed.
— Automatically sets the digital decode threshold for
APCO 25 systems.
— If you connect a GPS unit to the scanner it can
automatically enable and disable systems based on the Location Information
(longitude, latitude, Range) that you provide.
— The scanner alerts you to Dangerous
Intersections, Speed Alerts, and Points of Interest that you program into the scanner.
— Lets you display extended GPS information such as
GPS
14