Uniden UBC92XLT Owner'S Manual Download

Page: 37 / 56

Special Features

frequency and appear to select the band where
you are searching.

To turn on the Close Call feature and turn off normal
scanning, press (

Func

) twice.

flashes.

To turn off Close Call and turn on normal scanning,
press (

Func

) three times.

disappears.

Chain Search

This feature lets you search through preset
frequency ranges. You can also change each range
to a range you set. There are three modes within
this feature: chain search mode, chain search hold
mode, and program band select mode.

The preset frequency ranges are:

Chain Search Mode

Press

Func

Src

to start chain search mode.

SRCH

the enabled search bank number, and or
(indicating the search direction) appear. The search
bank number being searched flashes.

Bank
No.

Frequency (MHz)

Step
(kHz)

25.0000-27.9950

28.0000-69.9950

70.0000-88.0000

12.5

108.0000-136.9875

12.5

137.0000-147.9950

148.0000-174.0000

12.5

400.0000-419.99375

6.25

420.0000-449.99375

6.25

450.0000-512.0000

6.25

806.0000-956.0000

12.5

Summary of Contents for UBC92XLT

























































Search results

Summary of Contents for UBC92XLT

Reviews:

Related manuals for UBC92XLT

Brands by name

Popular brands

Uniden UBC92XLT, Owner'S Manual

Search results

Summary of Contents for UBC92XLT

Reviews:

Related manuals for UBC92XLT

Brands by name

Popular brands