manualshive.com logo in svg

Uniden UBC92XLT, Owner'S Manual

Share
Download
Uniden UBC92XLT Owner'S Manual Download Page 55

STATEMENT OF REMEDY:  

    

In the event that the Product does not conform to this 
warranty at any time while this warranty is in effect, the 
warrantor at its discretion, will repair the defect or replace 
the Product and return it to you without charge for parts or 
service. This warranty does not provide for reimbursement 
or payment of incidental or consequential damages.   
This EXPRESS WARRANTY is in addition to and 
does not in any way affect your rights under the 
TRADE PRACTICES ACT 1974 (Cth) (Australia) or the 
CONSUMER GUARANTEES ACT (New Zealand).   

        

PROCEDURE FOR OBTAINING PERFORMANCE OR 
WARRANTY:   

In the event that the Product does not conform to this 
warranty, the Product should be shipped or delivered, 
freight pre-paid, with evidence of original purchase (e.g. a 
copy of the sales docket), to the warrantor at:  

UNIDEN AUSTRALIA PTY LIMITED
SERVICE DIVISION

345 Princes Highway,
Rockdale NSW 2216
Fx (02) 9599 3278
www.uniden.com.au

UNIDEN NEW ZEALAND LIMITED
SERVICE DIVISION

150 Harris Road,
East Tamaki, Auckland
Fx (9) 274 4253
www.uniden.co.nz

Customers in other States should ship or deliver the 
Product freight pre-paid to their nearest Uniden
Authorised Repair Centre (Contact Uniden for the
nearest Warranty Agent to you) 

One-Year Limited Warranty

55

Summary of Contents for UBC92XLT

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands