Uniden TRU4060-2, Owner'S Manual, Page: 38 / 52

E X P A N D I N G Y O U R P H O N E [ 36 ]
How to Distinguish the Original Handset
and the Second Handset
The original handset and second handset are identical in appearance. To distinguish the
original and second handset, charge the handset on the base. If you charge the second
handset, HS2 appears, otherwise HS1 appears. There are some restrictions on the second
handset, see “Second Handset Operation” on page 38.
Your phone supports up to 2 handsets (the original handset and the second handset). You
can now place a fully featured cordless handset anywhere AC power is available to connect
the handset charger. Additionally, you can transfer an outside call to another handset.
Expanding Your Phone
• We refer to the handset No.2 as the second handset, and the handset No.1 as the original handset
in this section.
• Before use, you need to charge the battery pack for at least 15-20 hours.
Registering the Second Handset
You will need to register the second handset each time you change the digital security
code of the original unit. To register the second handset, simply place the second
handset in the original base for at least 5 seconds. The
status LED on the original base
will flash indicating that registration is occurring. After 5 seconds, the second handset
will be registered.
TRU4060-2_OM 5/15/02 4:56 PM Page 36