Uniden TRU4060-2, Owner'S Manual, Page: 28 / 52

P H O N E B O O K [ 26 ]
For example, to enter Uniden :
1) When the phone is in the standby mode, press pb/rocket/< . The handset displays the
number of phonebook locations you have stored, and how to search and store the
phonebook locations.
2) Press select/ch , then “
Store/Edit Name
” appears.
3) Press 8 twice.
4) Press 6 five times.
5) Press 4 six times.
6) Press 3 four times, then press cid/> to move the cursor to the right.
7) Press 3 five times.
8) Press 6 five times.
9) When finished, press select/ch .
To continue to store the telephone number, proceed to step 5 on page 24.
If the next character uses the same number key, you must press cid/> to move the cursor over.
Otherwise the next time you press the number key, it changes the character that was previously set.
If you make a mistake while entering a name
Use pb/rocket/< or cid/> to move the cursor to the incorrect character. Press xfer/del to
erase the wrong character, then enter the correct character. To delete all characters, press
and hold
xfer/del .
TRU4060-2_OM 5/15/02 4:56 PM Page 26