Uniden TRU4060-2, Owner'S Manual, Page: 32 / 52

Storing the RocketDial
1) When the phone is in the standby mode, press pb/rocket/< .
2) Press - once to display the RocketDial menu, then press
select/ch . Store the name, phone number, and distinctive ring by
following the steps 3 to 6 under “Storing the Phone Numbers,
Names, Distinctive Rings and Speed Dial” on page 24-25.
Making calls with the RocketDial
When the phone is in the standby mode, press and hold pb/rocket/< .
The number in the rocket location is dialed.
Deleting the RocketDial
1) When the phone is in the standby mode, press pb/rocket/< .
2) Press - to display the RocketDial menu.
3) Press xfer/del .
4) Press + to move the pointer to “
Yes
”.
5) Press select/ch . You will hear a confirmation tone.
P H O N E B O O K [ 30 ]
Chain Dialing
The memory locations in the handset are not limited to phone numbers. You can also store a
group of numbers (up to 20 digits), that you need to enter once your call connects. This is
referred to as Chain Dialing.
An example of this is a bank account number. Store the special number in the RocketDial
(refer to “Storing Phone Numbers, Names, Distinctive Rings and Speed Dial” on page 24.).
Once you have called your bank, and when you are prompted to enter the account number,
press
pb/rocket/< and - to select the number in the RocketDial, then press select/ch .
TRU4060-2_OM 5/15/02 4:56 PM Page 30